Fetal Dopplers
UltraTec PD1 Pocket Fetal Doppler
​
The UltraTec PD1 is a small, lightweight, high sensitivity pocket Doppler. Its 2MHz fetal Doppler probe is ideal for use by General Practitioner or Midwife for routine antenatal fetal detection.
The fetal signal is available to the user via the built in loudspeaker or optional headset with output level controlled by edge mounted volume control.
The fetal signals are easily located using the lightweight narrow beam transducer while internal signal processing minimises the noise artefacts.
The unit is powered by a standard 9V battery which provides over 9 hours of use.
The PD1 meets all current EEC standards for medical equipment.
Features
- 2MHz ultrasound probe
- Lightweight, hand held unit
- Fixed probe with retractable cable
- Easy clean plastic enclosure
- Battery saver system
- Surface mount electronics for high reliabilty
UltraTec PD1+ Pocket Fetal Doppler
​
The UltraTec PD1+ is a small, lightweight, high sensitivity pocket Doppler with built in fetal heart rate processing. The 2MHz fetal Doppler probe is ideal for use by a General Practitioner or Midwife for routine antenatal fetal detection.
The fetal heart rate is displayed on a large LCD display with the audio signal available to the user via the built in loudspeaker or optional headset with output level controlled by rotary volume control. FHR traces are available by connection of the serial output to the optional UltraTrace 2 PC compatible software.
The fetal signals are easily located using the lightweight narrow beam transducer while internal signal processing minimises the noise artefacts.
The unit is powered by a standard 9V battery which provides over 9 hours of use.
The PD1+ meets all current EEC standards for medical equipment.
Features
- 2MHz ultrasound probe
- Large LCD display of FHR
- Built-in autocorrelator software
- Light weight, hand held unit
- Fixed probe with retractile cable
- Easy clean plastic enclosure
- Battery saver system
- Surface mount electronics for high reliabilty
- RS232 connection
UltraTec PD1 dwr Water Birth Doppler
​
The PD1 dŵr is a fetal heart rate detecting Doppler with a waterproof probe, for use during water births. The audio unit is water resistant for longer life during use in water birth environments.
Features
- Simple to operate
- Lightweight
- Easy clean plastic enclosure
- Battery saver system
- Surface mount electronics for high reliability
- 2MHz ultrasound probe
- Fixed probe with retractable cable
- Large FHR display
- Built-in autocorrelator software
- RS232 FHR data connection
- Sealed probe for water immersion
- Water resistant audio unit.
UltraTec PD1 Combi
​
The standard PD1 Combi is a simple, audio only Doppler that is ideal for the General Practitioner, Midwife, or Vascular Specialist for routine examinations.
​​
Features
- Simple to operate
- Lightweight, easy clean plastic enclosure
- Battery saver system
- Surface mount electronics for high reliability
- 2MHz, 3MHz, 5MHz and 8MHz ultrasound, interchangeable probe
- Retractible cable connection
UltraTec PD1+ Combi
​
The PD1+ Combi is a heart rate detecting Doppler, ideal for the General Practioner, Midwife, or Vascular Specialist for routine examinations. Heart rate is detected using built-in autocorrelator software and the HR is presented on a large LCD display.
​
Features
- Simple to operate
- Lightweight, easy clean plastic enclosure
- Battery saver system
- Surface mount electronics for high reliability
- 2MHz, 3MHz, 5MHz and 8MHz ultrasound, interchangeable probe
- Retractable cable connection
- Large FHR display
- Built-in autocorrelator software
- RS232 HR data connection
UltraTec Freeplay FHRM Fetal Doppler
​
The Fetal Heart Rate Monitor (FHRM) is a portable hand-held, robust device with a probe that uses Doppler ultrasound waves to detect fetal heart rate. It uses built-in rechargeable batteries to enable health professionals to count the fetal heart rate in conditions where a reliable source of mains electricity may not be available. The main method of recharge or powering this device is by using the wind-up handle on the back of the device.
Features
- Simple to operate
- Lightweight
- Easy clean plastic enclosure
- Battery saver system
- Surface mount electronics for high reliability
- 2MHz ultrasound probe
- Fixed probe with retractable cable
- Wind-up handle
Desktop Doppler
Fetatrack DD250
​
The Fetatrack® DD250 offers continuous fetal and vascular doppler in the small clinic, hospital or doctors office.
Weighing under 2Kg, the Fetatrack® DD250 is a truly portable unit. It will operate from a mains supply or for over 30 hours from its built in rechargeable batteries.
The Fetatrack® DD250 has all the necessary facilities for accurate antenatal fetal heart rate detection or vascular assessment, in one cost effective and compact unit.
The probes are connected to the unit via a long retractile cable, reducing the need to continuously move the unit, and interchanged using a high reliability connector.
With full multipoint digital autocorrelation, the fetal heart detection it provides is accurate and reliable, with the display of fetal heart rate on a large, easy to read LCD display.
Simple to operate, the DD250 is designed with a minimum number of controls. Just one control to turn the unit on / off and to adjust the volume.
Fetal heart rate records can be kept by using the FetaTrace PC software, that is available as a monitoring package, with the option of a wide angle monitoring transducer.
Features
- 2MHz or 3MHz interchangeable obstetric probes or 5MHz or 8MHz interchangeable vascular probes
- Large LCD display of FHR
- Over 30 hours internal battery power
- Internal mains power supply
- Simple to operate
- Lightweight
- Portable
- Long retractable cable